PicoPOC is a POCSAG signal repeater designed to ensure indoor coverage continuity of your alert network.
PICoPOC is a POCSAG repeater developped and manufactured by TPL Systèmes for people encountering problems of coverage of their alert network inside buildings and houses.
PicoPOC enables to transmit again automatically the POCSAG messages that it receives and which are addressed to pager(s).
Very user friendly, PicoPOC repeater will be set up in only a few seconds, once programmed. It only takes to plug it to a 220V power source through the included power supply and to hang it on the wall thanks to its installation kit.
PicoPOC is synthesized and is available in more than 15 frequency bands (VHF and UHF).
PicoPOC has got 3 functionning modes that can be programmed through a customization software:
- Full repetition: all RIC codes and POCSAG messages received will be transmitted again.
- Repetition by list: only prepromgammed RIC codes and related POCSAG messages will be transmitted again. There’s a possibility to have a preprogrammed list up to 90 RIC codes.
- Repetition by prefix: only RIC codes beginning by preprogrammed prefix(es) and their related POCSAG messages, will be transmitted again. Possibility of having a list up to 10 RIC codes prefixes; example: 0241XXX ou 024XXXX etc...
PicoPOC is supplied with an antenna 1/4 wave and is equipped with a TNC antenna connector. This antenna can be replaced by an external antenna with a higher gain.
Moreover, PicoPOC is powered through a 220V/5V AC adapter which can be connected to the mini USB output, placed on the front case.
A « test » button enables to make a test of sending a message to a predefined pager number. A long pressing on this button enables to send this test message in a loop in order to carry out an assessment of the coverage.
Repetition features
3 repeating modes :
- Full repetition
- Repetition on addresses list (up to 100 entries)
- Repetition on addresses prefixes (up to 10 entries)
Sub-addresses management
Alphanumeric / numeric / tone only messages management
Anti ping-pong management, enabling to avoid that PicoPOC transmits again messages from another PicoPOC.
Main features
Power supply with 220V/5V AC adapter, mini-USB cable
Consumption : 90mA in Rx, 140mA in Tx
Programming by customization software in French and English
Aluminium case
Lateral fixing brackets included
Weight: 300 grs
Dimensions : 100 x 100 x 30 mm
Operating temperature and humidity from -10°C at +60°C, 95% at 40°C
Storage temperature and humidity from -20°C at +85°C, 95% at 40°C
POCSAG features
Frequency: all VHF frequencies, UHF frequencies on demand for bands:
135 - 174 MHz
438 - 472 MHz
868 - 870 MHz
Channel spacing: 12.5/20/25 KHz
System modulation: NRZ
Transmission speed: 512bps, 1200bps or 2400bps
Rx
Sensitivity at 512bps : -130dBm
Selectivity: 60dB (±25KHz)
Inter modulation protection : >60 dB
Frequency stability: ±2 ppm
Tx
Power : +14dBm (25mW)
Deviation frequency: ±2.25KHz (12.5KHz); ±3.6KHz (20KHz); ±4.5KHz (25KHz)
Package
PicoPOC is supplied with:
A 220V / 5V USB adapter
An omnidirectionnal antenna reclining to 90°
2 lateral fixing brackets
-
Commercial literature